mos2

As the main component of molybdenite, molybdenum disulfide is black solid powder with metallic luster. Molybdenum disulfide has stable properties. Molybdenum disulfide is insoluble in water, dilute acid and concentrated sulfuric acid. Generally, molybdenum disulfide is insoluble in other acids, alkalis and organic solvents, but molybdenum disulfide is soluble in aqua regia and boiled concentrated sulfuric acid. Molybdenum Disulfide is a lubricant grade of molybdenum disulfide (MoS2) available in three grades-Technical, Technical Fechnical Fine, and Super Fine.Typical MoS2 content (calculated average) is 98.5%. Molybdenum Disulfide is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and Molybdenum Disulfide can be lubricated for a long time in the air below 350℃. With more than ten years of R&D experience, it can provide an annual output of 1,000 tons of Molybdenum Disulfide as a patented technology product.

MoS2 Spray is a dry lubricant designed to provide long-lasting lubrication especially for lightly loaded or slowly moving to heavily loaded sliding surfaces. MoS2 Spray can form a solid molybdenum disulfide dry film on the surface of the parts, which can reduce friction and wear, and at the same time protect the parts from corrosion/seizing, contamination or wear. MoS2 Spray is widely used in sliding parts, including plain bearings, gears, sliding systems, cams and valves, with an operating temperature range of up to 450°C.

MoS2 Technical Fine Grade has strong corrosion resistance, compression resistance, high vacuum resistance, radiation resistance and adhesion to metals. . MoS2 Technical Fine Grade is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and MoS2 Technical Fine Grade can be lubricated for a long time in the air below 350 ℃. With more than ten years of research and development experience, it can provide an annual output of 550 tons of MoS2 Technical Fine Grade as a patented technology product. MoS2 Technical Fine Grade is a lubricant grade of molybdenum disulfide (MoS2). Typical MoS2 content (calculated average) is 98.5%.

MoS2 Technical Grade is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and MoS2 Technical Grade can be lubricated for a long time in the air below 350 ℃. With more than ten years of research and development experience, it can provide an annual output of 550 tons of MoS2 Technical Grade as a patented technology product. In the production process of MoS2 Technical Grade , microwave heating technology is introduced, and the water molecules in the slurry absorb microwave energy to achieve uniform and rapid heating, and to achieve production automation and stable quality. MoS2 Technical Grade is a lubricant grade of molybdenum disulfide (MoS2). Typical MoS2 content (calculated average) is 98.5%.

Compared with conventional molybdenum disulfide, the number of surface atoms in Nano molybdenum disulfide is significantly increased, and more sulfur vacancies are formed, which makes the catalytic activity and selectivity of Nano molybdenum disulfide higher. Nano molybdenum disulfide can be used as a highly active hydrogenation catalyst for heavy oil conversion and fuel oil refining. Nano molybdenum disulfide is used as a catalyst in the process of carbon monoxide methanation with high selectivity and reactivity. Nano molybdenum disulfide is also a catalyst for coal liquefaction. When used in the petrochemical industry, Nano molybdenum disulfide is a good catalytic hydrodesulfurization catalyst. Nano molybdenum disulfide that meets different functional requirements can be prepared by different methods, such as molybdenum disulfide self-lubricating thin layer, molybdenum disulfide intercalation battery, molybdenum disulfide high-efficiency hydrodesulfurization catalyst, etc. As the particle size of MoS2 becomes smaller, the adhesion and coverage of molybdenum disulfide on the surface of the friction material are significantly improved, and the anti-wear and anti-friction properties of molybdenum disulfide are also doubled. The energy band difference of the ultra-fine Nano molybdenum disulfide thin layer is close to 1.78eV, which matches the energy of light, and has application prospects in photovoltaic cell materials.

Molybdenum Disulfide Technical Fine Grade is a diamagnetic compound with semiconducting properties. The Mo-S facets in molybdenum disulfide are quite large, the specific surface area is large, the inner layer is a strong covalent bond, and the interlayer is a weak van der Waals force, The layers are easily peeled off, with good anisotropy and low friction coefficient. Molybdenum Disulfide Technical Fine Grade is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and Molybdenum Disulfide Technical Fine Grade can be lubricated for a long time in the air below 350 ℃. With more than ten years of research and development experience, it can provide an annual output of 550 tons of Molybdenum Disulfide Technical Fine Grade as a patented technology product. Molybdenum Disulfide Technical Fine Grade is a lubricant grade of molybdenum disulfide (MoS2). Typical MoS2 content (calculated average) is 98.5%.

Compared with molybdenum disulfide technical grade and Molybdenum disulfide technical fine grade, Molybdenum Disulfide Superfine Grade has incomparable advantages in industrial applications. Molybdenum disulfide itself has good lubricating properties. However, Molybdenum Disulfide Superfine Grade has high temperature, low temperature, high load, high speed, chemical corrosion and modern ultra-high temperature. Under vacuum conditions, Molybdenum Disulfide Superfine Grade has more excellent lubricity for equipment. Molybdenum Disulfide Superfine Grade is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and Molybdenum Disulfide Superfine Grade can be lubricated for a long time in the air below 350 ℃. With more than ten years of research and development/ R&D experience, we can provide an annual output of 1,000 tons of Molybdenum Disulfide Superfine Grade as a patented technology product.

Molybdenum Disulfide For Plastics is added to plastics to make modified plastics containing molybdenum disulfide powder, which can improve its bearing capacity and wear resistance without affecting the impact resistance and fatigue resistance of unmodified plastics such as cast nylon , widely used to manufacture gears, bearings, star wheels and sleeves, can widely replace wear-resistant parts of mechanical equipment, replace copper and alloys as wear-resistant and wearing parts of equipment, such as bushings, bearing bushes, bushings, lining plates, Gears, worm rollers, copper guide rails, piston rings, sealing rings, sliders, ball bowls, impellers, vanes, cams, nuts, valve plates, pipes, stuffing boxes, racks, pulleys, pump rotors, etc. Molybdenum Disulfide For Plastics is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and Molybdenum Disulfide For Plastics can be lubricated for a long time in the air below 350 ℃. With more than ten years of R&D experience, we can provide an annual output of 1,000 tons of Molybdenum Disulfide For Plastics as a patented technology product. Molybdenum Disulfide For Plastics is a lubricant grade of molybdenum disulfide (MoS2) available in three grades-Technical, Technical Fechnical Fine,and Super Fine.Typical MoS2 content (calculated average) is 98.5%.

Molybdenum Disulfide For Carbon Brush is an energy-saving material. Various metal materials and alloy materials added with Molybdenum Disulfide For Carbon Brush after surface treatment have significantly prolonged service life, and also play a huge role in mechanical lubrication. With more than ten years of research and development/ R&D experience, it can provide an annual output of 1,000 tons of Molybdenum Disulfide For Carbon Brush as a patented technology product. Molybdenum Disulfide For Carbon Brush is a lubricant grade of molybdenum disulfide (MoS2) available in two grades-Technical Fechnical Fine,and Super Fine.Typical MoS2 content (calculated average) is 98.5%.