MoS₂ Technical Grade

Introduction

MoS₂ Technical Grade is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and MoS₂ Technical Grade can be lubricated for a long time in the air below 350 ℃.

With more than ten years of research and development experience, it can provide an annual output of 550 tons of MoS₂ Technical Gradeas a patented technology product.In the production process of MoS₂ Technical Grade , microwave heating technology is introduced, and the water molecules in the slurry absorb microwave energy to achieve uniform and rapid heating, and to achieve production automation and stable quality.

MoS₂ Technical Grade is a lubricant grade of molybdenum disulfide (MoS₂). Typical MoS₂ content (calculated average) is 98.5%.

Chemical Specifications of MoS₂ Technical Grade：

*Acid number is determined at time of production. Prolonged storage will result in slight oxidation,which will produce an increase in acid number.The smaller particle size grades are more susceptible to surface oxidation.Acid number is expressed as an absolute value and is the mg of  KOH required to neutralize the acid in a one-gram sample.

Particle Size Specifications of MoS₂ Technical Grade By Microtrac：

Typical Particle Size of MoS₂ Technical Grade By Microtrac By Fisher Sub-sizer and Bulk Density:

Packaging of MoS₂ Technical Grade：

Figure 1: Applications of MoS₂ Technical Grade 

MoS₂ Technical Grade is widely used in Lubricant, Plastic modification, Grease, and powder metallurgy such as Valve guide.

Figure 2: Mechanism of microwave heating

As shown in figure 2 , hydrogen atoms and oxygen atoms in water molecules in the slurry absorb microwave energy to achieve uniform and rapid heating, and to achieve production automation and stable quality.

Figure 3: Ready for loading in the production plant.

The factory has an annual production capacity of 550 tons of MoS₂ Technical Grade for domestic and foreign customers.