molybdenum disulfide for nylon modification

Molybdenum Disulfide For Powder Metallurgy can be used as a dry lubricant in dispersions.Various metal materials and alloy materials added with Molybdenum Disulfide For Powder Metallurgy after surface treatment have significantly prolonged service life, and also play a huge role in mechanical lubrication.Unlike graphite, Molybdenum Disulfide For Powder Metallurgy's low coefficient of friction (0.03-0.06) is inherent, not due to adsorption films or gases. Molybdenum Disulfide For Powder Metallurgy is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and Molybdenum Disulfide For Powder Metallurgy can be lubricated for a long time in the air below 350 ℃. With more than ten years of research and development/ R&D experience, it can provide an annual output of 1,000 tons of Molybdenum Disulfide For Powder Metallurgy as a patented technology product. Molybdenum Disulfide For Powder Metallurgy is a lubricant grade of molybdenum disulfide (MoS2) available in three grades-Technical, Technical Fechnical Fine,and Super Fine.Typical MoS2 content (calculated average) is 98.5%.

Molybdenum Disulfide For Plastics is added to plastics to make modified plastics containing molybdenum disulfide powder, which can improve its bearing capacity and wear resistance without affecting the impact resistance and fatigue resistance of unmodified plastics such as cast nylon , widely used to manufacture gears, bearings, star wheels and sleeves, can widely replace wear-resistant parts of mechanical equipment, replace copper and alloys as wear-resistant and wearing parts of equipment, such as bushings, bearing bushes, bushings, lining plates, Gears, worm rollers, copper guide rails, piston rings, sealing rings, sliders, ball bowls, impellers, vanes, cams, nuts, valve plates, pipes, stuffing boxes, racks, pulleys, pump rotors, etc. Molybdenum Disulfide For Plastics is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and Molybdenum Disulfide For Plastics can be lubricated for a long time in the air below 350 ℃. With more than ten years of R&D experience, we can provide an annual output of 1,000 tons of Molybdenum Disulfide For Plastics as a patented technology product. Molybdenum Disulfide For Plastics is a lubricant grade of molybdenum disulfide (MoS2) available in three grades-Technical, Technical Fechnical Fine,and Super Fine.Typical MoS2 content (calculated average) is 98.5%.