Molybdenum Disulfide For Powder Metallurgy can be used as a dry lubricant in dispersions.Various metal materials and alloy materials added with Molybdenum Disulfide For Powder Metallurgy after surface treatment have significantly prolonged service life, and also play a huge role in mechanical lubrication.Unlike graphite, Molybdenum Disulfide For Powder Metallurgy's low coefficient of friction (0.03-0.06) is inherent, not due to adsorption films or gases.
Molybdenum Disulfide For Powder Metallurgy is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and Molybdenum Disulfide For Powder Metallurgy can be lubricated for a long time in the air below 350 ℃.
With more than ten years of research and development/ R&D experience, it can provide an annual output of 1,000 tons of Molybdenum Disulfide For Powder Metallurgy as a patented technology product.
Molybdenum Disulfide For Powder Metallurgy is a lubricant grade of molybdenum disulfide (MoS2) available in three grades-Technical, Technical Fechnical Fine,and Super Fine.Typical MoS2 content (calculated average) is 98.5%.
Molybdenum Disulfide For Powder Metallurgy
Introduction
Molybdenum Disulfide For Powder Metallurgy can be used as a dry lubricant in dispersions.Various metal materials and alloy materials added with Molybdenum Disulfide For Powder Metallurgy after surface treatment have significantly prolonged service life, and also play a huge role in mechanical lubrication.Unlike graphite, Molybdenum Disulfide For Powder Metallurgy's low coefficient of friction (0.03-0.06) is inherent, not due to adsorption films or gases.
Molybdenum Disulfide For Powder Metallurgy is a good solid lubricant that can be lubricated in a vacuum or air environment for a long time. The friction coefficient is relatively low, and Molybdenum Disulfide For Powder Metallurgy can be lubricated for a long time in the air below 350 ℃.
With more than ten years of research and development/ R&D experience, it can provide an annual output of 1,000 tons of Molybdenum Disulfide For Powder Metallurgy as a patented technology product.
Molybdenum Disulfide For Powder Metallurgy is a lubricant grade of molybdenum disulfide (MoS2) available in three grades-Technical, Technical Fechnical Fine,and Super Fine.Typical MoS2 content (calculated average) is 98.5%.
Chemical Specifications of Molybdenum Disulfide For Powder Metallurgy：
Maximum % by wt | Maximum % by wt | Maximum % by wt | |
Technical | Technical Fine | Super Fine | |
Acid Insoluble | 0.50 | 0.50 | 0.50 |
Iron | 0.25 | 0.25 | 0.25 |
Molybdenum Trioxide | 0.10 | 0.10 | 0.15 |
Water | 0.20 | 0.20 | 0.20 |
Oil | 0.05 | 0.40 | 0.40 |
Carbon | 0.50 | 0.50 | 0.50 |
Acid Number | 0.05 | 0.50 | 3.0 |
*Acid number is determined at time of production. Prolonged storage will result in slight oxidation,which will produce an increase in acid number.The smaller particle size grades are more susceptible to surface oxidation.Acid number is expressed as an absolute value and is the mg of KOH required to neutralize the acid in a one-gram sample.
Particle Size Specifications of Molybdenum Disulfide For Powder Metallurgy By Microtrac：
Grade | D50 | D99(Maximum) |
Technical | 16.0-30.0μm | 180μm |
Technical Fine | 4.0-6.0μm | 35.0μm |
Super Fine | 0.9-1.5μm | 6.5μm |
Typical Particle Size of Molybdenum Disulfide For Powder Metallurgy By Microtrac By Fisher Sub-sizer and Bulk Density:
Grade | Fisher Number, μm | Bulk Density(Scott) |
Technical | 3 to 4 | 1.3g/cm3 |
Technical Fine | 0.65 to 0.80 | 0.4g/cm3 |
Super Fine | 0.40 to 0.45 | 0.3g/cm3 |
Packaging of Molybdenum Disulfide For Powder Metallurgy ：
Grade | US Packaging Fiber Drum | Pallet weight |
Technical | 25kg | 450kg |
Technical Fine | 25kg | 450kg |
Super Fine | 25kg | 450kg |
18 drums/pallet | ||
Figure 1: Packaging of Molybdenum Disulfide For Powder Metallurgy
Packed in 25kg wooden barrels or 50kg iron barrels.
Figure 2: Ready for loading
On January 30, 2023, molybdenum price rose by more than 20% in a single day, breaking a new 17-year high. Molybdenum is known as the "war metal", "steel warrior". Molybdenum is valued by more and more countries. China is the world's richest country in molybdenum resources, with reserves of 4.3 million tons, followed by the United States (2.7 million tons) and Chile (1.8 million tons), which acco...more
